CoolRater

CoolRater is a desktop app which will measure the Heat Transfer Coefficient (HTC) for a building, by combining temperature measurements with energy data from the smart meter. This statistic can be used to predict the heating requirement for the property, a function that has become important in recent years for use in sizing heat pumps. It provides insight into expected financial and environmental costs and can be used for cost-benefit analysis of insulation upgrades and measuring the improvement resulting from the upgrades after they are completed.

More detail and the theory behind it was presented in this video released on 1st October 2025.
A spreadsheet template was provided in the video description which could be used to perform the function described above, but it was very labour intensive to use. The temperature and energy data needed to be provided in csv files and manually copied into the spreadsheet, and the “Solver” function of the spreadsheet program, such a Libra Office, used to generate the final result. No-one did this to my knowledge, so the CoolRater app was created to make the task quick and easy.

To achieve this, temperature data is loaded straight from thermometers via USB, and the energy data loaded from your energy provider’s website using their API service. Currently the thermometers used must be Elitech RC-5+ devices, and the energy provider must be Octopus Energy.

the modern approach to measuring heat loss



Standard Assessment Procedure (SAP)

Currently, heat loss calculations make assumptions about the insulation at your property, rather than measuring how well it actually works. Is the cavity wall insulation still as good as it was when it was installed 40 years ago?


Measuring rather than Calculating

CoolRater provides an alternative of measuring the HTC using recording thermometers to measure the inside and outside temperatures, and combining them with the energy data from your smart meter.

The measurement could be described as "Putting the heating on and seeing how well it heats the house up". And that's it in a nutshell! The app just enables you to make a good job of doing so.

You can have confidence in the results. The project files of the app are CSV files that you can open with a spreadsheet program such as Excel or LibraOffice, or a text editor such as Notepad. And the calculations performed on the data are as described in the video "Discover Fylingdale Court's Insulation Secret", and the spreadsheet template provided with that video. So if you wanted to you could reproduce them independently.


Works on both Gas Boilers and Heat Pumps

I ran a few tests with the spreadsheet when I had a gas boiler, and several more after I had that replaced by a heat pump. I was delighted that the results with the heat pump were very similar to the results with the gas boiler, because the boiler efficiency, and the COP of the heat pump were measured in very different ways. 

Providing results and the accuracy and reliability of the results



Copyright (c) 2026, All Rights Reserved.                     Contact: info@coolrater.co.uk
free website
built with
kopage